# Use a dynamic tun device.
# For Linux 2.2 or non-Linux OSes,
# you may want to use an explicit
# unit number such as "tun1".
# OpenVPN also supports virtual
# ethernet "tap" devices.
dev tap

# Our OpenVPN peer is the IP of the server
# FIXME: make this an internet IP so it's less confusing
remote 192.168.55.3

# 192.168.69.2 our local VPN endpoint (client).
# 192.168.69.1 is our remote VPN endpoint (server).
ifconfig 192.168.69.2 192.168.69.255

ip-win32 manual

# Our up script will establish routes
# once the VPN is alive.
up client-up.bat


# In SSL/TLS key exchange, Office will
# assume server role and client
# will assume client role.
tls-client

# Certificate Authority file
ca client-ca.crt

# Our certificate/public key
cert client.crt

# Our private key
key client.key

# Use the following settings for optimal performance.
proto udp
port 53

# Use the following settings if you have a fascist network administrator
# who watches network logs attentively just to catch people like you

# proto tcp
# port 443


# If you built OpenVPN with
# LZO compression, uncomment
# out the following line.
comp-lzo

# Send a UDP ping to remote once
# every 15 seconds to keep
# stateful firewall connection
# alive.  Uncomment this
# out if you are using a stateful
# firewall.
; ping 15

# Uncomment this section for a more reliable detection when a system
# loses its connection.  For example, dial-ups or laptops that
# travel to other locations.
ping 15
; ping-restart 45
ping-timer-rem
persist-tun
persist-key

# Verbosity level.
# 0 -- quiet except for fatal errors.
# 1 -- mostly quiet, but display non-fatal network errors.
# 3 -- medium output, good for normal operation.
# 9 -- verbose, good for troubleshooting
verb 3